DC/AC inverter for the DIN rail by Phoenix Contact – Pure sine curve at the output with monitoring

The DC/AC inverter for the DIN rail converts direct current into alternating current and provides a pure sine curve at the output. The manual selection of the AC output voltage via a signal terminal enables worldwide use.

An integrated USB interface can be used to connect industrial PCs, for example. Furthermore, the inverter can be switched in parallel. With the parallel connection of two devices, it is possible to increase the operational safety of systems in the event of power supply failure or double the power on the output side. Connect three devices in parallel to create a three-phase grid. The three devices communicate with each other in real time, thereby synchronizing the 120° phase shift. This means that AC drives can also be operated. Due to the comprehensive signalling options and the wide temperature range from -25°C to +60°C, the inverter supports flexible use.

Your Advantages

  • Can be used worldwide thanks to manual selection of AC output voltage via signal terminal
  • Pure sine curve at the output
  • Comprehensive signaling
  • Parallel connection possible (increased performance and redundancy, 3 AC)
  • Integrated USB interface
  • Space-saving with the compact design.

    For further details: E-mail- adverts@phoenixcontact.co.in

Leave a Reply