Kusam-Meco AC/DC TRMS Digital Clampmeter

It meets the requirements for CAT IV 1000V AC & DC & is UL Approved.

KUSAM-MECO has introduced a new AC/DC TRMS Digital Clampmeter Model KM 2777. It meets the requirements for CAT IV 1000V AC & DC & is UL Approved. It has features, functions & ranges never seen before in one Digital Clamp-on Multimeter. It has 3-5/6 digits 6,000 + 3-1/2 digits 1,999 counts Dual LCD display with 5/sec update rate. Its Jaw size is 55mm. It measures AC & DC Current upto 2000 Amps. It can measure fundamental voltage & frequency of most Variable Frequency Drives (VFD). An additional feature is Non-Contact-EF Detection. For precise indication of live circuits, it has probe contact EF detection function also.

It has transient protection upto 12 KV (1.2/50µs) providing excellent protections for those who are safety conscious. It has CAT IV 1 KV High Safety over Voltage Category. The Digital Clampmeter has unbeatable 400 KHz DC + AC Performance & VFD features. It has high basic accuracy of 0.5% (DCV) and Resolution 1mV DC. It has Auto & manual ranging functions except in Hz & Capacitance function range. To provide clear reading of the displayed value in the dark, it has backlight LCD display.

The voltage measurement is upto 1000 V AC/DC with high impedance, also it can measure Noisy High Voltage AC Frequencies upto 1999Hz in dual display. It has capacitance measurement function upto 2000µF. It can do continuity tests at very fast speed. It has PC interface capability with optional purchase of USB Cable software.

It has AC/DC voltage, AC+DC voltage, AC/DC current (clamp on), autocheck DCV, autocheck ACV, VFD ACV, Ohm & Autocheck Ohm, capacitance, temperature, DC + ACA current (clamp on), Hz line level frequency, Non-Contact EF-Detection measurement. It has Diode Test, Continuity Test, Peak Hold, Display Hold, Relative-Zero Mode, Range-Lock & Function-Lock function.

The meter meets the requirements for double insulation per IEC/EN61010-1 2nd Ed, UL61010-1 2nd Ed., & CAN/CSA C22.2 No.61010.1-0.92. This meter operates on standard 1.5V AA Size battery x 2. It’s dimension is 264(L) x 97(W) x 43(H) mm & weight about 608g . It is supplied with Carrying Case, Test leads (pair), Operating manual & Bkp60 banana plug K-type Thermocouple x 1. USB interface kit BRUA-19X, BKB32 banana plug to type-K socket plug adaptor is Optional Accessory.


For further information, visit: www.kusamelectrical.com

Leave a Reply