New Testo Thermal Imagers– testo 868 / testo 872
Helps to find hot spots and thermal anomalies in any electrical, mechanical equipment, electrical power panels as well as control panels.
- More convenience: Operation and documentation by smartphone
- More quality: Best price-performance ratio in its class
- More flexibility: Wireless connectivity to testo Smart Hygrometer 605i and testo Clamp meter 770-3
- More economical: A package deal that pays off quickly.
Using thermal imager with Thermo-hygrometer testo 605i
Due to its smart connectivity via Bluetooth technology of testo 872 and testo 605i, helps you to measure and record, the scene ambient temperature and ambient humidity while you take thermal image of any electrical and mechanical equipment or any object. It helps you, in your analysis / trouble shooting and it also helps you to take corrective actions in any electrical equipment as per NETA (National Electrical Testing Association) standards for Delta-T temperatures (i.e. Delta-T = Hot spot temperature – Ambient temperature). The combination of Testo Thermal Imager 872 with Testo’s thermo-hygrometer 605i, also help to get you real time humidity image of any object / any scene in building applications. It helps building leakage contractors to find the leaks in buildings / establishments to fix it later after analysis.
Using thermal imager with Testo TRMS Digital Multimeter 760-3
The combination uses of Testo thermal Imager 868 along with Testo’s TRMS Digital Multimeter 760-3, helps user to get real time system AC/DC voltages, mA current and other important electrical parameters of your load / electrical panel / electrical motors. The unique feature of LPF- Low pass filter enable you to measure precisely the voltages at the output of any non-linear loads, VFD drives etc. You can precisely analyse the problem associated with your electrical equipment with these Testo’s instruments and later you can fix them appropriately.
Using thermal imager with Testo TRMS Clamp Meter 770-3
Due to SMART connectivity via blue tooth technology of testo 872 and testo 770-3, helps user to measure and record automatically in report, the real time system voltage, load current and load power while you are taking thermal image of any electrical panel / electrical motors. You can precisely analyse the problem associated with your electrical equipment with this combination use of Testo’s instruments and later you can fix them appropriately.
Using thermal imager with Vane anemometer SMART probe – testo 410i
The combination of Testo thermal Imager 868 or testo 872 along with Testo’s vane type anemometer SMART probe testo 410i, helps user to get real time air / wind velocities data on Testo’s SMART probe app, while you are taking thermal image of any electrical switch yard or outdoor electrical installations. With this you can precisely determine the hot spot temperatures with consideration of wind velocities and wind compensation factors as per standards available. This will avoid error in hot spot temperature and will also avoid wrong corrective actions which one has to fix the problem associated with the electrical systems.
For more info, write to info@testo.in or visit at www.testo.com